Jackery Solar Generator HomePower 1000 v2: 1024Wh, 1500W
This post contains affiliate links. As an affiliate, Shopping Ticket may earn from qualifying purchases at no extra cost to you. Full disclosure here.
The Jackery Solar Generator HomePower 1000 v2 pairs the HomePower 1000 v2 portable power station with SolarSaga solar panels. The power station has a 1024Wh LiFePO4 battery and a 1500W AC output with a 3000W surge peak, and the solar generator is offered in Black and White.
This page covers what comes with the solar generator, the battery and power output, the ports and charging inputs, the SolarSaga 200W solar panel, and the built-in protection features, followed by a full spec table and answers to common questions.
HomePower 1000 v2 Solar Generator
⚡ 1024Wh • 1500W AC • LiFePO4 • SolarSaga Solar Panel
What Comes with the Solar Generator
- HomePower 1000 v2 power station: One portable power station with a 1024Wh battery.
- AC charging cable: One cable for charging from a wall outlet.
- Solar panel: One SolarSaga 200W, or two SolarSaga 100W Air panels, depending on the variant.
- User manual: One HomePower 1000 v2 user manual.
Jackery lists three variants: Black or White with a SolarSaga 200W solar panel, and Black with two SolarSaga 100W Air panels.
Battery and Power Output
The HomePower 1000 v2 uses a 1024Wh (20Ah / 51.2V DC) LiFePO4 battery, and Jackery lists a cycle life of 6000 cycles to 70%+ capacity. The AC output has three 120V 60Hz outlets with a combined 1500W rated output and a 3000W surge peak.
Jackery lists a switchover time under 10 ms, and the power station also offers a bypass mode of 100V-120V 60Hz at up to 12A.
Ports and Charging
The output ports include a 30W max USB-C port, a 100W max USB-C port, and an 18W max USB-A port, alongside the three AC outlets. The AC input takes 100V-120V 60Hz at up to 15A, and the DC input uses two DC8020 ports for solar charging.
SolarSaga 200W Solar Panel
The SolarSaga 200W has a peak power of 200W ±5%, an open circuit voltage of 22V, and a maximum system voltage of 60V. It weighs 14.33 lbs (6.5 kg), folds to 23.62 x 23.50 x 1.57 inches, and unfolds to 89.76 x 23.50 x 0.98 inches. Jackery lists an IP68 water resistance rating, and the panel has its own USB-A and USB-C ports.
Protection and Controls
Jackery lists built-in lightning protection with 3kV surge resistance, operating noise under 30 dB, and Jackery Priority Routing. Priority Routing lets you choose which devices stay powered: when the battery reaches a preset level, it shuts down less critical devices. The power station operates for charging and discharging between 14°F and 113°F (-10°C to 45°C).
Jackery Solar Generator HomePower 1000 v2 at a Glance
| Model | Jackery Solar Generator HomePower 1000 v2 |
| Battery capacity | 1024 Wh (20Ah / 51.2V DC) |
| Cell chemistry | LiFePO4 |
| Cycle life | 6000 cycles to 70%+ capacity, per Jackery |
| AC output | 3 outlets, 120V~ 60Hz, 12.5A, 1500W rated total |
| Surge peak | 3000W |
| USB-C output | One 30W max port and one 100W max port |
| USB-A output | 18W max |
| AC input | 100V-120V~ 60Hz, 15A max |
| Bypass mode | 100V-120V~ 60Hz, 12A max |
| DC input | 2 x DC8020 ports |
| Switchover | Under 10 ms, per Jackery |
| Surge protection | Built-in lightning protection and 3kV surge resistance, per Jackery |
| Operating noise | Under 30 dB, per Jackery |
| Charge temperature | 14°F to 113°F (-10°C to 45°C) |
| Discharge temperature | 14°F to 113°F (-10°C to 45°C) |
| Station dimensions | 12.4 x 7.9 x 9.2 in (31.4 x 20.1 x 23.4 cm) |
| Station weight | About 23.4 lbs (10.6 kg) |
| SolarSaga 200W peak power | 200W ±5% |
| SolarSaga 200W voltage and current | Voc 22V, Isc 12.5A, Vmp 18V, Imp 11.5A (each ±5%) |
| SolarSaga 200W max system voltage | 60V |
| SolarSaga 200W water resistance | IP68 |
| SolarSaga 200W operating temperature | -4°F to 149°F (-20°C to 65°C) |
| SolarSaga 200W folded size | 23.62 x 23.50 x 1.57 in (600 x 597 x 40 mm) |
| SolarSaga 200W unfolded size | 89.76 x 23.50 x 0.98 in (2279 x 597 x 25 mm) |
| SolarSaga 200W weight | 14.33 lbs ±0.66 lbs (6.5 kg ±0.3 kg) |
| SolarSaga 200W panel ports | USB-A 5V 2.4A and USB-C 5V 3A |
Frequently Asked Questions (FAQ)
What comes with the Jackery Solar Generator HomePower 1000 v2?
The HomePower 1000 v2 power station, an AC charging cable, a SolarSaga 200W solar panel (or two SolarSaga 100W Air panels, depending on the variant), and a user manual.
What battery does the HomePower 1000 v2 have?
A 1024Wh (20Ah / 51.2V DC) LiFePO4 battery. Jackery lists a cycle life of 6000 cycles to 70%+ capacity.
What is the AC output?
Three 120V 60Hz AC outlets with a 1500W rated total output and a 3000W surge peak.
What ports does it have?
Three AC outlets, a 30W max USB-C port, a 100W max USB-C port, and an 18W max USB-A port.
How does the power station recharge?
Through the AC input (100V-120V 60Hz, 15A max) or the DC input, which uses two DC8020 ports for the solar panels.
How big and heavy is the power station?
It measures 12.4 x 7.9 x 9.2 inches (31.4 x 20.1 x 23.4 cm) and weighs about 23.4 lbs (10.6 kg).
What colors does it come in?
Jackery lists Black and White variants with a SolarSaga 200W, and a Black variant with two SolarSaga 100W Air panels.
What are the SolarSaga 200W panel specs?
A peak power of 200W ±5%, 22V open circuit voltage, 12.5A short circuit current, an IP68 rating, and a weight of 14.33 lbs (6.5 kg).
What is Jackery Priority Routing?
A feature that lets you choose which devices stay powered. When the battery reaches a preset level, it shuts down less critical devices.
What temperatures can it operate in?
Jackery lists 14°F to 113°F (-10°C to 45°C) for both charging and discharging the power station.
⚡ Browse More Solar Generators on Shopping Ticket
🔗 Also see: Oukitel P5000 Pro Portable Power Station